Kitchen Chimney Installation Guide With Tools


There are a few considerations necessary before executing a kitchen chimney installation. There’s the size, electricity consumption, cost, and measurements within the area of the house that you’re going to install it on.

Nonetheless, armed with the proper knowledge and preparation it won’t be that hard a task. At the very least, should you hire someone to install it for you (As in most of the case) you can assess their work accordingly and make sure to maintain your kitchen chimney properly after the work is done.

Here’s our kitchen chimney installation guide. In this installation tutorial, we will try to write step by step How To Install A Kitchen Chimney? in India.

Also, we discuss what should you consider before installing a chimney?

Kitchen Chimney Installation required Tools

Before you start installing a kitchen chimney you need some tools, which will make the installation process easier if you have them. The tools are –

  • Medium Hammer
  • Pliers
  • Shears
  • Screwdriver
  • Inchi tape
  • Marker-pen
  • some items/tools including in the chimney box

NOTE You can get some additional tools that can help you with the installation. So be sure to check the chimney box properly.

Chimney size

Obviously, the kitchen chimney size is a determining factor for the installation process. A kitchen chimney’s size determines its capacity as well as the proper placement needed for it to efficiently work.

ReadHow to Choose the Right Kitchen Chimney Size?

For example, a larger chimney sucks up smoke at a better rate even if it is a little off position when installed from your hob*. You must then make sure to find the center of your hob and match it with your chimney if they are just about the same size.

*Hob the hob is the flat metal shelf right at the side or at the back of your fireplace. It is used specifically for heating pans. 

Chimney suction power

Depending on the size of your kitchen, you must make sure that your kitchen chimney’s suction power can handle the task at hand. Suction power is valued in cubic meters per hour or m3/hr. 

Suction power can range from 400 m3/hr to 1000 m3/hr. Here’s how to calculate the right amount of suction power needed for your kitchen chimney for the size of your kitchen.

For instance, your kitchen is measured at 40m3 that’s 4 x 4 x 2.5 meters. The fresh air in the kitchen needs to be replaced 10 times within an hour. So you multiply 40m3 by 10 and you get your needed suction power of 400 m3/hr.

The things that determine a kitchen chimney’s suction power are ducting size, diameter, and length. Add in the number of bends in ducting and your cooking habits and you know what to expect from your kitchen chimney.

Chimney Electricity Power Consumption Cost


Multiple types of chimneys are available. Most models employ a motor that is not that heavy-duty. Its motor runs at a speed of about 150 to 250 watts and it depends on its suction power.

So you have to consume a total of 400 watts of power and 250 watts of continuous power consumption during running the Chimney. Enough power supply is required after the Kitchen Chimney Installation.

if you interested to Know How Much Electricity Is Consumed By A Kitchen Chimney?

Chimney duct pipe

All you have to determine is that the chimney duct shouldn’t be longer than 12 feet. You need to choose the right position for the chimney that your piping connects outdoors with the shortest distance possible. 

This technique is not just practical but ensures maximum efficiency from the suction of your kitchen chimney. You may use stainless steel as it is the most recommended material for chimney duct pipes due to its durability, strength, and resistance to corrosion. PVC and aluminum are also good materials for chimney ducts.

Cut-out for chimney duct in the external wall

A 6-inch circular cutout in your external wall for your chimney duct should be observed. It should be then made on your external wall at 7 feet from the floor or right above the window lintel level.

If there isn’t any pre-existing cutout in your kitchen then make sure to make the chimney installer to make whole at the right position for you. Unfortunately, a ductless model chimney those renting out a place where there are strict restrictions.

Distance from countertop

26 to 30 inches should be the ideal distance between the cooktop and the ducted chimney. You might block your pans and vessels should you install it lower than that. On contrary, should you installed too high then its air suction would not remove fumes efficiently and that would defeat the entire purpose of installing one in the first place?

Start using first after installing kitchen chimney

You need to keep the chimney ON for a few minutes before you start cooking. Chimney speed adjusted to requirements after cooking activities begin. This will make the smoke absorb better.

For example, you can adjust the chimney speed according to the amount of smoke you produce when cooking something. Your chimney has three different speed settings that you can adjust as needed.

Chimney speed setting mode is

  • Normal speed
  • High speed
  • And very high speed

Make sure to follow our kitchen chimney installation guide and you’d have yourself an efficient running chimney that will serve its purpose properly.

9 thoughts on “Kitchen Chimney Installation Guide With Tools

  • at

    Well, that was quite unique info about chimneys that hardly anyone got on the internet. Thanks for sharing.


Leave a Reply

Your email address will not be published. Required fields are marked *